How to use the automatic bottle blowing machine

When the room temperature blow molding machine is used in the installation position, the bracket and spray parts are placed in the protected room, about 5 meters to 8 meters away from the door; the air compressor trolley is placed outdoors, and the spray parts are connected with cables and air hoses.

The operator can operate the electrical cabinet of the air compressor trolley outdoors. The spray parts and brackets can be carried by a single person, and can be quickly disassembled and assembled, inserted before spraying, and carried out after spraying. The whole set of machines can be operated by one to two people. At present, the type and dosage of the normal temperature bottle blowing machine are the same as those of the manual bottle blowing machine.
The large motor drives the air compressor to generate compressed air (pressure of 150 kPa to 201 kPa), which enters the vortex chamber of the nozzle through the air hose. A high-speed rotating airflow is generated and a partial vacuum is formed. The medicine tank liquid is sucked into the nozzle through the infusion tube, and the air and liquid medicine are mixed at high speed and atomized into a blown bottle with an average diameter of about 20 microns, which is sprayed from the nozzle. At the same time, the small motor drives the axial flow fan to generate low pressure and large air flow, blowing the nozzle to the distant place.
It can propagate more than 30 meters along the axis, and the width can reach more than 6 meters. After 30 minutes to 60 minutes of spraying in the limited confined space of the protected area, the blown bottles can be evenly distributed and float around the room. And suspended in the space for 2 hours to 3 hours, so that the bottle blowing can fully contact the active parts of crop diseases and insect pests, and produce a better control effect. This machine is applicable to emulsions, wettable powders, liquids, oils, etc. The spout can be adjusted in the height range of 0.9 meters to 1.3 meters according to the height of the crop varieties.